Standardization · SIS/TK 103

Fästelement

Fästelement, med eller utan gängor, används av i stort sett all tillverkningsindustri där sammansättning och montering sker. Det är därför viktigt att skapa underlag för enhetlig produktinformation för att uppnå god ekonomi vid tillverkning, enkla förfaranden vid beställning, leverans och montering samt säkerställa slutfunktion och utbytbarhet hos fästelementen.

Huvudmålet för standardiseringen av gängor och gängtoleranser är att erhålla ett gängsystem som används för konstruktionsgängor världen över och vid sidan av detta, men endast där speciellt definierade och accepterade behov finns, internationellt accepterade gängsystem för speciella applikationer. Standardisering av fästelement syftar till att öka kvaliteten på samt förenkla och förbilliga de fästelementtyper som används idag. Bl.a. för att man bättre skall kunna utnyttja egenskaperna hos de material som används i fästelementen.

More information about the committèes work:

Published 370 standards

SS-ISO 2903-2:2025
ISO metric trapezoidal screw threads — Tolerances — Part 2: Limits of sizes (ISO 2903-2:2025, IDT)

Language:

SS-ISO 965-6:2025
ISO general purpose metric screw threads — Tolerances — Part 6: Limits of sizes for internal and external threads (Fine and medium tolerance qualities, first and second choices) (ISO 965-6:2024, IDT)

Language:

SS-EN ISO 13669:2025
Fasteners — Grooved pins — General requirements (ISO 13669:2024, IDT)

Language:

SS-EN ISO 7040:2025
Fasteners — Prevailing torque hexagon nuts — Regular nuts (with non-metallic insert) (ISO 7040:2025, IDT)

Language:

SS-EN ISO 10511:2025
Fasteners — Prevailing torque hexagon nuts — Thin nuts (with non-metallic insert) (ISO 10511:2024, IDT)

Language:

SS-EN ISO 7720:2025
Fasteners — Prevailing torque hexagon nuts — High nuts (all metal) with slot(s) (ISO 7720:2024, IDT)

Language:

SS-EN ISO 10512:2025
Fasteners — Prevailing torque hexagon nuts — Regular nuts (with non-metallic insert), with fine pitch thread (ISO 10512:2024, IDT)

Language:

SS-EN ISO 10513:2025
Fasteners — Prevailing torque hexagon nuts — High nuts (all metal), with fine pitch thread (ISO 10513:2024, IDT)

Language:

SS-EN ISO 7042:2025
Fasteners — Prevailing torque hexagon nuts — High nuts (all metal) (ISO 7042:2024, IDT)

Language:

SS-EN ISO 7719:2025
Fasteners — Prevailing torque hexagon nuts — Regular nuts (all metal) (ISO 7719:2024, IDT)

Language:

SS-EN ISO 7041:2025
Fasteners — Prevailing torque hexagon nuts — High nuts (with non-metallic insert) (ISO 7041:2024, IDT)

Language:

SS-EN ISO 8740:2025
Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves (ISO 8740:2023, IDT)

Language:

SS-EN ISO 8745:2025
Fasteners — Taper grooved pins — Half-length progressive grooves (ISO 8745:2024, IDT)

Language:

SS-EN ISO 8744:2025
Fasteners – Taper grooved pins – Full-length progressive grooves (ISO 8744:2024, IDT)

Language:

SS-EN ISO 8741:2025
Fasteners — Reverse-taper grooved pins — Half-length progressive grooves (ISO 8741:2024, IDT)

Language:

SS-EN ISO 8746:2025
Fasteners — Grooved pins with round head — Full-length diamond grooves (ISO 8746:2024, IDT)

Language:

SS-EN ISO 8747:2025
Fasteners − Grooved pins with countersunk head − Full-length diamond grooves (ISO 8747:2024, IDT)

Language:

SS-EN ISO 13672:2025
Fasteners — Parallel grooved pins — Half-length diamond grooves (ISO 13672:2024, IDT)

Language:

SS-EN ISO 3506-3:2025
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes (ISO 3506-3:2025, IDT)

Language:

SS-EN ISO 3506-4:2025
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes (ISO 3506-4:2025, IDT)

Language:

SS-ISO 965-2:2024
ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for internal and external threads (tolerance classes 6H and 6g for M1,6 to M100 and 5H and 6h for M1 to M1,4) (ISO 965-2:2024, IDT)

Language:

SS-ISO 3506-7:2024
Fasteners — Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 7: Flat washers with specified grades and property classes (ISO 3506-7:2024, IDT)

Language:

SS-EN ISO 4766:2024
Fasteners - Slotted set screws with flat point (ISO 4766:2024, IDT)

Language:

SS-EN ISO 7436:2024
Fasteners - Slotted set screws with cup point (ISO 7436:2024, IDT)

Language:

SS-EN ISO 7434:2024
Fasteners - Slotted set screws with cone point (ISO 7434:2024, IDT)

Language:

SS-EN ISO 7435:2025
Fasteners - Slotted set screws with long dog point (ISO 7435:2024, IDT)

Language:

SS-ISO 262:2023
ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts (ISO 262:2023, IDT)

Language:

SS-EN ISO 3506-5:2023
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications (ISO 3506-5:2022)

Language:

SS-ISO 724:2023
ISO general purpose metric screw threads — Basic dimensions (ISO 724:2023; IDT)

Language:

SS-ISO 68-1:2023
ISO general purpose screw threads — Basic and design profiles — Part 1: Metric screw threads (ISO 68-1:2023, IDT)

Language:

SS-ISO 68-2:2023
ISO general purpose screw threads — Basic and design profiles — Part 2: Inch screw threads (ISO 68-2:2023, IDT)

Language:

SS-EN ISO 8675:2023
Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)

Language:

SS-EN ISO 8673:2023
Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)

Language:

SS-EN ISO 4035:2023
Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)

Language:

SS-EN ISO 8674:2023
Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO 8674:2023)

Language:

SS-EN ISO 4033:2023
Fasteners - Hexagon high nuts (style 2) (ISO 4033:2023)

Language:

SS-EN ISO 4032:2023
Fasteners - Hexagon regular nuts (style 1) (ISO 4032:2023)

Language:

SS-ISO 3506-5:2023
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications (ISO 3506-5:2023, IDT)

Language:

SS-EN ISO 7380-2:2023
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)

Language:

SS-EN ISO 7380-1:2023
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)

Language:

SS-EN ISO 14581:2023
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)

Language:

SS-EN ISO 2702:2023
Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)

Language:

SS-EN ISO 898-2:2022
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)

Language:

SS-EN ISO 8676:2022
Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)

Language:

SS-EN ISO 4018:2022
Fasteners - Hexagon head screws - Product grade C (ISO 4018:2022)

Language:

SS-EN ISO 4016:2022
Fasteners - Hexagon head bolts - Product grade C (ISO 4016:2022)

Language:

SS-EN ISO 4015:2022
Fasteners - Hexagon head bolts with reduced shank (shank diameter ˜ pitch diameter) - Product grade B (ISO 4015:2022)

Language:

SS-EN ISO 4014:2022
Fasteners - Hexagon head bolts - Product grades A and B (ISO 4014:2022)

Language:

SS-EN ISO 8765:2022
Fasteners - Hexagon head bolts, with fine pitch thread - Product grades A and B (ISO 8765:2022)

Language:

SS-EN ISO 4017:2022
Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022)

Language:

SS-EN ISO 3506-6:2022
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)

Language:

SS-EN ISO 4042:2022
Fasteners - Electroplated coating systems (ISO 4042:2022)

Language:

SS-ISO 965-5/Amd 1:2021
ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing — Amendment 1 (ISO 965-5:1998/Amd 1:2021, IDT)

Language:

SS-ISO 965-1:2015/Amd 1:2021
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1 (ISO 965-1:2013/Amd 1:2021, IDT)

Language:

SS-ISO 965-3:2021
ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads (ISO 965-3:2021, IDT)

Language:

SS-ISO 965-4:2021
ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:2021, IDT)

Language:

SS-ISO 2902:2021
ISO metric trapezoidal screw threads - General plan (ISO 2902:2016, IDT)

Language:

SS-ISO 2901:2021
ISO metric trapezoidal screw threads - Basic and design profiles (ISO 2901:2016, IDT)

Language:

SS-EN ISO 1891-2:2014/A1:2021
Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)

Language:

SS-EN ISO 898-3:2018/A1:2021
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)

Language:

SS-EN ISO 3506-2:2020
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)

Language:

SS-EN ISO 3506-1:2020
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)

Language:

SS-ISO 2904:2020
ISO metric trapezoidal screw threads - Basic dimensions (ISO 2904:2020, IDT)

Language:

SS-EN ISO 10642:2019
Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)

Language:

SS-EN ISO 3269:2019
Fasteners - Acceptance inspection (ISO 3269:2019)

Language:

SS-EN ISO 7053:2019
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)

Language:

SS-EN ISO 15480:2019
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)

Language:

SS-EN ISO 10683:2018
Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2018)

Language:

SS-EN 14399-7:2018
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies

Language:

SS-EN 14399-8:2018
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies

Language:

SS-EN ISO 888:2018
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)

Language:

SS-EN ISO 898-3:2018
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)

Language:

SS-EN ISO 1891-4:2018
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)

Language:

SS-EN 14399-9:2018
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies

Language:

SS-EN 14399-10:2018
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload

Language:

SS-ISO 885:2018
General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000, IDT)

Language:

SS-EN ISO 16228:2018
Fasteners - Types of inspection documents (ISO 16228:2017)

Language:

SS-EN ISO 4759-3:2016
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)

Language:

SS-EN 15048-2:2016
Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose

Language:

SS-EN 15048-1:2016
Non-preloaded structural bolting assemblies - Part 1: General requirements

Language:

SS-EN ISO 2320:2016
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)

Language:

SS-ISO 965-1:2015
ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:2013, IDT)

Language:

SS-EN 14399-1:2015
High-strength structural bolting assemblies for preloading - Part 1: General requirements

Language:

SS-EN 14399-6:2015
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers

Language:

SS-EN 14399-5:2015
High-strength structural bolting assemblies for preloading - Part 5: Plain washers

Language:

SS-EN 14399-4:2015
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies

Language:

SS-EN 14399-3:2015
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies

Language:

SS-EN 14399-2:2015
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading

Language:

SS-EN ISO 1891-2:2014
Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)

Language:

SS-EN ISO 10664:2014
Hexalobular internal driving feature for bolts and screws (ISO 10664:2014)

Language:

SS-EN ISO 21670:2014
Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)

Language:

SS-EN ISO 14582:2013
Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)

Language:

SS-EN ISO 898-1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)

Language:

SS-EN ISO 4034:2013
Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)

Language:

SS-EN ISO 16047:2005/A1:2012
Fasteners - Torque/clamp force testing (ISO 16047:2005/Amd 1:2012)

Language:

SS-EN ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)

Language:

SS-ISO 10509:2012
Hexagon flange head tapping screws (ISO 10509:2012, IDT)

Language:

SIS-ISO/TR 16224:2012
Technical aspects of nut design

Language:

SS-EN ISO 4753:2011
Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011)

Language:

SS-EN ISO 7046-2:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)

Language:

SS-EN ISO 7047:2011
Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)

Language:

SS-EN ISO 1580:2011
Slotted pan head screws - Product grade A (ISO 1580:2011)

Language:

SS-EN ISO 7045:2011
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)

Language:

SS-EN ISO 7046-1:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)

Language:

SS-EN ISO 2010:2011
Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)

Language:

SS-EN ISO 2009:2011
Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)

Language:

SS-EN ISO 7051:2011
Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)

Language:

SS-EN ISO 1481:2011
Slotted pan head tapping screws (ISO 1481:2011)

Language:

SS-EN ISO 1479:2011
Hexagon head tapping screws (ISO 1479:2011)

Language:

SS-EN ISO 1207:2011
Slotted cheese head screws - Product grade A (ISO 1207:2011)

Language:

SS-EN ISO 1483:2011
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)

Language:

SS-EN ISO 7050:2011
Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)

Language:

SS-EN ISO 1482:2011
Slotted countersunk (flat) head tapping screws (ISO 1482:2011)

Language:

SS-EN ISO 7049:2011
Cross-recessed pan head tapping screws (ISO 7049:2011)

Language:

SS-EN ISO 7048:2011
Cross-recessed cheese head screws (ISO 7048:2011)

Language:

SS-EN ISO 10510:2011
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)

Language:

SS-EN ISO 14579:2011
Hexalobular socket head cap screws (ISO 14579:2011)

Language:

SS-EN ISO 14583:2011
Hexalobular socket pan head screws (ISO 14583:2011)

Language:

SS-EN ISO 14584:2011
Hexalobular socket raised countersunk head screws (ISO 14584:2011)

Language:

SS-EN ISO 14580:2011
Hexalobular socket cheese head screws (ISO 14580:2011)

Language:

SS-EN ISO 14585:2011
Hexalobular socket pan head tapping screws (ISO 14585:2011)

Language:

SS-EN ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)

Language:

SS-EN ISO 14586:2011
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)

Language:

SS-EN ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)

Language:

SS-EN ISO 225:2010
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)

Language:

SS-ISO 724/Cor 1:2009
ISO general-purpose metric screw threads - Basic dimensions (ISO 724:1993/Cor 1:2009, IDT)

Language:

SS-ISO 5408:2009
Screw threads - Vocabulary (ISO 5408:2009, IDT)

Language:

SS 637004:2009
Geographic information - Road and railway networks - Application schema

Language:

SS-EN ISO 10673:2009
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)

Language:

SS-EN ISO 10644:2009
Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)

Language:

SS-EN ISO 8752:2009
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)

Language:

SS-EN ISO 13337:2009
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)

Language:

SS-ISO 1501:2009
ISO miniature screw threads (ISO 1501:2009, IDT)

Language:

SS-EN ISO 10684:2004/AC:2009
Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)

Language:

SS-ISO 1891:2009
Fasteners - Terminology (ISO 1891:2009, IDT)

Language:

SS-EN 1665/AC:1998:2008
Hexagon bolts with flange - Heavy series

Language:

SS-EN 14219/AC:2007:2008
Hexagon bolts with flange with metric fine pitch thread - Small series

Language:

SS-EN 1665/AC:2007:2008
Hexagon bolts with flange - Heavy series

Language:

SS-EN 1662/AC:2007:2008
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)

Language:

SS-EN ISO 8751:2007
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)

Language:

SS-EN ISO 8750:2007
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)

Language:

SS-EN ISO 8748:2007
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)

Language:

SS-EN ISO 887/AC:2006
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)

Language:

SS-EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation

Language:

SS-EN 14831:2005
Fasteners - Tightening performance - Torque/Angle simplified test method

Language:

SS-EN 10226-1:2005
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

Language:

SS-EN ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)

Language:

SS-EN 10226-3:2005
Pipe threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges

Language:

SS-EN ISO 16047:2005
Fasteners - Torque/clamp force testing (ISO 16047:2005)

Language:

SS-EN ISO 10484:2004
Widening test on nuts (ISO 10484:1997)

Language:

SS-EN ISO 6157-2:2004
Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995)

Language:

SS-EN ISO 10684:2004
Fasteners - Hot dip galvanized coatings (ISO 10684:2004)

Language:

SS-EN ISO 10485:2004
Cone proof load test on nuts (ISO 10485:1991)

Language:

SS-EN ISO 4762:2004
Hexagon socket head cap screws (ISO 4762:2004)

Language:

SS-EN ISO 23429:2004
Gauging of hexagon sockets (ISO 23429:2004)

Language:

SS-EN ISO 4027:2004
Hexagon socket set screws with cone point (ISO 4027:2003)

Language:

SS-EN ISO 4029:2004
Hexagon socket set screws with cup point (ISO 4029:2003)

Language:

SS-EN ISO 4028:2004
Hexagon socket set screws with dog point (ISO 4028:2003)

Language:

SS-EN ISO 2342:2004
Slotted headless screws with shank (ISO 2342:2003)

Language:

SS-EN ISO 4026:2004
Hexagon socket set screws with flat point (ISO 4026:2003)

Language:

SS-EN ISO 228-2
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)

Language:

SS-EN ISO 228-1
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)

Language:

SS-ISO 965-5
ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

Language:

SS-ISO 261
ISO general purpose metric screw threads - General plan

Language:

SS-EN 14219
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)

Language:

SS-EN 14218
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)

Language:

SS-EN ISO 16048
Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)

Language:

SS-EN ISO 16426
Fasteners - Quality assurance system (ISO 16426:2002)

Language:

SS-EN ISO 16582
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)

Language:

SS-EN ISO 15983
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)

Language:

SS-EN ISO 15982
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)

Language:

SS-EN ISO 15980
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)

Language:

SS-EN ISO 16585
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002)

Language:

SS-EN ISO 15978
Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)

Language:

SS-EN ISO 15977
Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)

Language:

SS-EN ISO 16584
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)

Language:

SS-EN ISO 15984
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)

Language:

SS-EN ISO 15981
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)

Language:

SS-EN ISO 15979
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)

Language:

SS-EN ISO 15975
Closed end blind rivets with break pull mandrel and protruding head - AI/AIA (ISO 15975:2002)

Language:

SS-EN ISO 16583
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)

Language:

SS-EN ISO 15976
Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002)

Language:

SS-EN ISO 7094/AC:2002
Plain washers - Extra large series - Product grade C (ISO 7094:2000/Cor 1:2000)

Language:

SS-EN ISO 14588
Blind rivets - Terminology and definitions (ISO 14588:2000)

Language:

SS-EN ISO 14589
Blind rivets - Mechanical testing (ISO 14589:2000)

Language:

SS-EN ISO 15974
Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)

Language:

SS-EN ISO 15973
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)

Language:

SS-EN ISO 4759-1
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)

Language:

SS-EN ISO 7092
Plain washers - Small series - Product grade A (ISO 7092:2000)

Language:

SS-EN ISO 7089
Plain washers - Normal series - Product grade A (ISO 7089:2000)

Language:

SS-EN ISO 7091
Plain washers - Normal series - Product grade C (ISO 7091:2000)

Language:

SS-EN ISO 7093-2
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000)

Language:

SS-EN ISO 7093-1
Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000)

Language:

SS-EN ISO 7094
Plain washers - Extra large series - Product grade C (ISO 7094:2000)

Language:

SS-EN ISO 7090
Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)

Language:

SS-EN ISO 10666
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999)

Language:

SS-EN ISO 1478
Tapping screws thread (ISO 1478:1999)

Language:

SS-EN ISO 15482
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)

Language:

SS-EN ISO 15481
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)

Language:

SS-EN ISO 10669
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999)

Language:

SS-EN ISO 15483
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)

Language:

SS 1523
Fasteners - Tapping screws with ST-threads - Holediameters

Language:

SS-EN 1664
Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified)

Language:

SS-EN 1667
Prevailling torque type all-metal hexagon nuts with flange with metric fine pitch thread (ISO 12126:1997, modified)

Language:

SS-EN 1663
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified)

Language:

SS-EN 1662
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)

Language:

SS-EN 1661
Hexagon nuts with flange (ISO/DIS 4161:1996, modified)

Language:

SS-EN 1666
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified)

Language:

SS-ISO 3800
Threaded fasteners - Axial load fatigue testing -Test methods and evaluation of results

Language:

SS-EN ISO 8735
Parallel pins with internal thread, of hardened steel and martensitic stainless steel (ISO 8735:1997)

Language:

SS-EN ISO 2338
Parallel pins, of unhardened steel and austeniticstainless steel (ISO 2338:1997)

Language:

SS-EN ISO 8739
Grooved pins - Full-lenght parallel grooved, withpilot (ISO 8739:1997)

Language:

SS-EN ISO 8742
Grooved pins - One-third-lenght centre grooved (ISO 8742:1997)

Language:

SS-EN ISO 1234
Split pins (ISO 1234:1997)

Language:

SS-EN ISO 8734
Parallel pins of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)

Language:

SS-EN ISO 8733
Parallel pins with internal thread, unhardened steel or austenitic stainless steel (ISO 8733:1997)

Language:

SS-EN ISO 8743
Grooved pins - Half-lenght centre grooved (ISO 8743:1997)

Language:

SS-EN 1665
Hexagon bolts with flange - Heavy series

Language:

SS-EN 20898-7
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)

Language:

SS-EN ISO 7721-2
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)

Language:

SS-EN ISO 4757
Cross recesses for screws (ISO 4757:1983)

Language:

SS-ISO 8737
Taper pins with external thread, unhardened

Language:

SS-EN 28749
Pins and grooved pins - Shear test (ISO 8749:1986)

Language:

SS-ISO 8736
Taper pins with internal thread, unhardened

Language:

SS-EN 28736
Taper pins with internal thread, unhardened (ISO 8736:1986)

Language:

SS-EN 22340
Clevis pins without head (ISO 2340:1986)

Language:

SS-EN 22339
Taper pins, unhardened (ISO 2334:1986)

Language:

SS-ISO 8738
Plain washers for clevis pins - Product grade A

Language:

SS-EN 28738
Plain washers for clevis pins - Product grade A (ISO 8738:1986)

Language:

SS-ISO 8749
Pins and grooved pins - Shear test

Language:

SS-ISO 2340
Clevis pins without head

Language:

SS-ISO 2339
Taper pins, unhardened

Language:

SS-EN 27434
Slotted set screws with cone point (ISO 7434:1983)

Language:

SS-ISO 2341
Clevis pins with head

Language:

SS-EN 28737
Taper pins with external thread, unhardened (ISO 8737:1986)

Language:

SS-EN 22341
Clevis pins with head (ISO 2341:1986)

Language:

SS-ISO 6157-1
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements

Language:

SS-ISO 6157-3
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements

Language:

SS-EN 20273
Fasteners - Clearance holes for bolts and screws

Language:

SS-EN 26157-3
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)

Language:

SS-EN 26157-1
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)

Language:

SS 2398
ISO general purpose metric screw threads - Gauging

Language:

SS-EN 28839
Fasteners - Mechanical properties of fasteners - Bolts, screws, studs and nuts made from non-ferrous metals

Language:

SS-EN 27721
F"stelement - S"nkhuvuden p+ skruvar - Form och m"tning

Language:

SS 2177
High hexagon nuts - ISO metric screw threads

Language:

SS 2179
Hexagon slotted and castle nuts - ISO metric screw threads

Language:

SS 2178
Jointing hexagon nuts - ISO metric screw threads

Language:

SS 1898
Grub screws with thrust point - ISO metric screw threads

Language:

SS 2180
Hexagon domed cap nuts - ISO metric screw threads

Language:

SS 199
Stop rings of steel with ISO metric screw threadsfor set screws

Language:

SS 1964
Threaded blind holes - ISO metric screw threads -Coarse pitch

Language:

SS 1630
Square washers for wood constructions - Metric series - Product grade C

Language:

SS 2
ISO general purpose metric screw threads with coarse pitch

Language:

SS 1715
ISO general purpose metric screw threads - Selected sizes for screw threads with fine pitch

Language:

SS 1716
ISO inch screw threads - Selected sizes for screwthreads with coarse pitch

Language:

SS 1925
ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs

Language:

SS 1713
ISO inch screw threads - General plan

Language:

SS 1744
Screw thread gauging with wires

Language:

SS 1924
ISO general purpose metric screw threads with coarse pitch - Screw thread tolerances for metal end of studs

Language:

SS 3194
ISO inch screw threads - Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes

Language:

SS 1717
ISO inch screw threads - Selected sizes for screwthreads with fine pitch

Language:

SS 2173
Diameters of spot facings, counterbores and countersinks - Screws and nuts with ISO metric screw threads and tapping screws

Language:

SS 1403
Internal run-outs and under-cuts ISO metric screwthreads

Language:

SMS 9003
Gears - List of Swedish standards

Language:

SS-ISO 3508
Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262

Language:

SS-ISO 4755
Fasteners - Thread undercuts for external metric ISO threads

Language:

SS 3392
Tapping screws - Determination of strength and assembly properties

Language:

SS-ISO 7436
Slotted set screws with cup point

Language:

SS-ISO 7721
Countersunk head screws - Head configuration and gauging

Language:

SS 2020
Hexagon head wood screws

Language:

SS-ISO 272
Fasteners - Hexagon products - Widths across flats

Language:

SS-ISO 273
Fasteners - Clearance holes for bolts and screws

Language:

SS 1659
Semi-tubular flat head rivets

Language:

SS 1652
Tubular rivets made from tube

Language:

SS 1651
Rivets - General requirements

Language:

SS 1442
Tinmens rivets

Language:

SS 1440
Round head rivets

Language:

SS 1653
Tubular rivets made from strips

Language:

SS 1443
Flat countersunk head rivets

Language:

SS 318
Countersunk head rivets for steel constructions

Language:

SS 1662
Split rivets with mushroom head

Language:

SS 1675
Countersunk head rivets - Upsetting and clamping lengths

Language:

SS 1674
Round head rivets - Upsetting and clamping lengths

Language:

SS 39
Round head rivets for steel constructions

Language:

SS 1661
Semi-tubular mushroom head rivets

Language:

SS 1660
Semi-tubular countersunk head rivets

Language:

SS 1441
Countersunk head rivets

Language:

SS 1781
Rivets - Determination of strength properties forrivets in riveted joints in thin sheets

Language:

SS 3357
Screw threads - Asymmetrical trapezoidal screw threads of plastic material - Basic dimensions and screw thread tolerances - Metric serie

Language:

SS 3358
ISO metric trapezoidal screw threads - Limits of sizes

Language:

SS 1748
Screw calliper gauges - Profiles and tolerances for setting plugs for ISO inch screw threads

Language:

SS 1746
Screw ring gauges - Profiles and tolerances for ISO inch screw threads

Language:

SS 1745
Screw plug gauges and plain plug gauges - Profiles and tolerances for ISO inch screw threads

Language:

SS 1747
Screw calliper gauges - Profiles and tolerances for ISO inch screw threads

Language:

SS 1712
Threads - UNF-threads, dimensioned for coating - Thread tolerances

Language:

SS 1711
Threads - UNC-threads, dimensioned for coating - Thread tolerances

Language:

SS 1863
Spur gears - Geometrical data

Language:

SS 2996
Bevel gears - Tolerances and general directions

Language:

SS 1862
Bevel gears - Calculation of load capacity

Language:

SS 1860
Cylindrical gears - Tolerances and general directions

Language:

SS 1857
Gears - Terminology

Language:

SS 1864
Helical gears - Geometrical data

Language:

SS 1858
Worms - Modules, diameter ratios and lead angles

Language:

SS 3013
Bevel gears - Tolerances for metric modules 1 to 25

Language:

SS 1875
Cylindrical gears - Tolerances for metric modules1 to 25

Language:

SS 1871
Spur and helical gears - Calculation of load capacity

Language:

SS 2060
Bevel gears - Errors and measuring techniques

Language:

SS 1869
Cylindrical gears - Involute gear teeth - Errors and measuring techniques

Language:

SS 1859
Worm gears - Geometrical data

Language:

SMS 3037
Cylindrical gears - Basic rack with tip chamfer and machining allowance for shaving

Language:

SMS 3015
Cylindrical gears - Basic rack with machining allowance for grinding

Language:

SMS 3014
Cylindrical gears - Basic rack with machining allowance for milling and shaping

Language:

SMS 93
Square taper washers for channels

Language:

SMS 874
Finishing washers

Language:

SMS 2030
Spherical washers, conical seats

Language:

SMS 1874
Straight bevel gears. Geometrical data

Language:

SMS 206
Wing nuts. ISO metric screw threads. Coarse pitch

Language:

SMS 978
Grooved pins

Language:

SMS 3185
Nuts for T-slots. ISO metric screw threads

Language:

SMS 1724
Drills for use prior to tapping screw threads

Language:

SMS 2548
Vehicles - Mobile radio equipment - Installation dimensions

Language:

SMS 2995
Cylindrical and bevel gears. Fatigue limits for steel and cast iron

Language:

SMS 2378
Tolerances for round head and countersunk square neck bolts. Metric screw threads. Coarse pitch

Language:

SMS 1872
Straight bevel gears. Basic rack without tip relief

Language:

SMS 1873
Straight bevel gears. Basic rack with tip relief

Language:

SMS 1868
Basic rack for worm gears

Language:

SMS 52
Cylindrical and bevel gears. Modules

Language:

SMS 296
Cylindrical gears. Basic rack without tip relief

Language:

SMS 1861
Cylindrical gears. Basic rack with tip relief

Language:

SMS 1870
Worms. Type ZA, ZN, ZI, ZK

Language:

SMS 2379
Countersunk square neck bolts. Metric screw threads. Coarse pitch

Language:

SMS 2380
Countersunk square neck bolts. Metric screw threads. Coarse pitch

Language:

SMS 208
Wing screws. Metric screw threads. Coarse pitch

Language:

SMS 1718
Unified threads. Thread tolerances. Introduction

Language:

SMS 775
Clearance holes for screws. UNC and UNF threads

Language:

SMS 1925
UNC-threads for the fixing end of studs. Thread tolerances

Language:

SMS 1719
UNC-threads. Thread tolerances. Class 1, 2 and 3

Language:

SMS 1720
UNF-threads. Thread tolerances. Class 1, 2 and 3

Language:

SMS 1850
Involute spline joints. Tolerances and fits. Flank guide. Pitch 12/24

Language:

SMS 1844
Involute spline joints. Dimensions. Pitch 5/10. Hub

Language:

SMS 1838
Involute spline joints. Dimensions. Pitch 10/20. Hub

Language:

SMS 1831
Involute splines. Nomenclature, design and calculation formulas

Language:

SMS 1830
Involute splines. Survey and introduction

Language:

SMS 1853
Involute spline joints. Tolerances and fits. Flank guide. Pitch 6/12

Language:

SMS 1849
Involute spline joints. Tolerances and fits. Flank guide. Pitch 48/96, 40/80, 32/64, 24/48, 20/40, 16/32

Language:

SMS 1842
Involute spline joints. Dimensions. Pitch 6/12. Hub

Language:

SMS 1837
Involute spline joints. Dimensions. Pitch 12/24. Shaft

Language:

SMS 1836
Involute spline joints. Dimensions. Pitch 12/24. Hub

Language:

SMS 1833
Involute splines. Theoretical spline profile for spline-bar

Language:

SMS 1851
Involute spline joints. Tolerances and fits. Flank guide. Pitch 10/20

Language:

SMS 1848
Involute spline joints. Tolerances and fits. Introduction

Language:

SMS 1847
Involute spline joints. Dimensions. Pitch 4/8. Shaft

Language:

SMS 1845
Involute spline joints. Dimensions. Pitch 5/10. Shaft

Language:

SMS 1840
Involute spline joints. Dimensions. Pitch 8/16. Hub

Language:

SMS 1835
Involute spline joints. Dimensions. Pitch 48/96 40/80 32/64 24/48 20/40. 16/32. Shaft

Language:

SMS 1855
Involute spline joints. Tolerances and fits. Flank guide. Pitch 4/8

Language:

SMS 1852
Involute spline joints. Tolerances and fits. Flank guide. Pitch 8/16

Language:

SMS 1846
Involute spline joints. Dimensions. Pitch 4/8. Hub

Language:

SMS 1841
Involute spline joints. Dimensions. Pitch 8/16. Shaft

Language:

SMS 1839
Involute spline joints. Dimensions. Pitch 10/20. Shaft

Language:

SMS 716
Involute splines. Recommended sizes

Language:

SMS 1854
Involute spline joints. Tolerances and fits. Flank guide. Pitch 5/10

Language:

SMS 1843
Involute spline joints. Dimensions. Pitch 6/12. Shaft

Language:

SMS 1834
Involute spline joints. Dimensions. Pitch 48/96 40/80 32/64 24/48 20/40 16/32. Hub

Language:

SMS 1549
Round head drive screws. Type KDS

Language:

SMS 1524
Eye bolts. Type LS. M-thread: SMS 2

Language:

SMS 61
Steel square head screws. Type SFS. M-thread: SMS2

Language:

SMS 59
Adjusting screws. Type T4SS. M-thread: SMS 2

Language:

SMS 681
Round threads: Rd Nominal dimensions

Language:

SMS 680
Round threads for filter containers for gas-protective equipment

Language:

Show more Show less

Working group 1 workgroups

SIS/TK 103/AG 1, Kraftöverföring

Participants 7 companies and organizations

Atlas Copco Industrial Technique AB, Stockholm

BUMAX AB, Åshammar

Epiroc Drilling Tools AB, Fagersta

Nord-Lock AB, Mattmar

Scania CV AB, Södertälje

Volvo Lastvagnar AB, Göteborg

Volvo Technology AB, Göteborg

Show more Show less

International participation 13 international committees

ISO/TC 1, Screw threads

ISO/TC 2, Fasteners

ISO/TC 2/SC 11, Fasteners with metric external thread

ISO/TC 2/SC 12, Fasteners with metric internal thread

ISO/TC 2/SC 13, Fasteners with non-metric thread

ISO/TC 2/SC 14, Surface coatings

ISO/TC 2/SC 7, Reference standards

ISO/TC 2/WG 13, Washer and non-threaded fasteners

ISO/TC 2/WG 17, Stainless steel fasteners

ISO/TC 2/WG 18, Pre-applied adhesive systems for threaded fasteners

ISO/TC 5/SC 5, Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges

CEN/TC 185, Fasteners

CEN/TC 185/WG 6, Structural bolting

Show more Show less

Financing

Arbetet styrs och finansieras av de organisationer som deltar i kommittén. Projektavgiften beror på arbetsform och omfattning, samt antal deltagare.

Läs mer om Fästelement

Arbetet med standardisering av fästelement påbörjades redan i början av 1900-talet och den första svenska standarden inom området skruvar och muttrar utgavs 1920. ISO/TC 1 som är den internationella standardiseringskommittén för gängor var den första kommittén som startades efter andra världskriget och Sverige har varit aktiva i kommittén redan från start.

Påverka nationellt och internationellt

Kommittén skapar ett forum för svenskt agerande i den internationella standardiseringen, genom att vi aktivt medverkar i både den europeiska och den internationella standardorganisationen, CEN och ISO. På så sätt kan vi driva utvecklingen av standarderna så att de främjar den svenska industrin. Företag och organisationer som deltar får möjlighet till bättre insikt i vilka krav som gäller och vilka som kommer att börja gälla, samt möjlighet att påverka dessa.

Arbetet inom SIS/TK 103 omfattar alla standardiseringsärenden inom de internationella grupperna:
ISO/TC 1, Screw threads

ISO/TC 2, Fasteners och dess subkommittéer och arbetsgrupper

ISO/TC 5/SC 5, Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges

Samt motsvarande europeiskt standardiseringsarbete inom CEN/TC 185, Threaded and non-threaded mechanical fasteners and accessories.

Mer information om det internationella arbetet inom ISO och CEN finns på följande länkar: www.iso.org och www.cencenelec.eu.

Ett värdefullt arbete

I kommittén samlas expertkunskap genom representanter från tillverkare, användare, intresseorganisationer, myndigheter och övriga inom branschen. Standardiseringsarbetet ger deltagarna djupare insikt om standardernas krav och hur man resonerar kring dessa, vilket underlättar vid diskussion med olika parter inom branschen. Deltagarna är samtidigt med och påverkar framtidens standarder, vilket också leder till nya insikter och tidig information som kan omsättas i den egna verksamhetsutvecklingen.

I kommittén ges också tillfälle att diskutera tolkningar och utbyta erfarenheter med såväl kunder som konkurrenter, och etablera nya kontakter.

Vill du vara med i kommittén?

Om du är intresserad av att delta, kontakta oss så berättar vi mer. Läs mer om kommittéarbete inom SIS här.

Aktuella remisser att kommentera

Aktuella remisser inom området för Fästelement

Subjects

Mechanical systems and components for general use (21) Fasteners (21.060) General (21.060.01) Bolts, screws, studs (21.060.10) Nuts (21.060.20) Washers, locking elements (21.060.30) Rivets (21.060.40) Pins, nails (21.060.50) Rings, bushes, sleeves, collars (21.060.60) Clamps and staples (21.060.70) Other fasteners (21.060.99)

Fästelement

More information about the committèes work:

Påverka nationellt och internationellt

Ett värdefullt arbete

Vill du vara med i kommittén?

Subjects

För dig som kommittédeltagare i SIS/TK 103

Verksamhetsplan

Två kommittéer blir en!

Contact

Discount	- EUR	- SEK
Sum	EUR	SEK
Shipping	EUR	SEK
Vat	EUR	SEK
Total	EUR	SEK

Fästelement

More information about the committèes work:

Påverka nationellt och internationellt

Ett värdefullt arbete

Vill du vara med i kommittén?

Subjects

För dig som kommittédeltagare i SIS/TK 103

Verksamhetsplan

Två kommittéer blir en!

Contact

Within the same area